Skip to main content

PJ Solar

DI water vs. tap water for solar panel cleaning: Tap water can contain dissolved minerals that remain as spots after drying. PJ Solar uses deionized (DI) water only on panel glass to reduce minerals introduced during cleaning. Whether your tap water is suitable depends on its quality and the care instructions for your exact panel model.

Compare DI water and tap water

QuestionTap waterDeionized water
Dissolved mineralsContent varies by water supply. Clear water can still contain minerals.Treatment removes dissolved mineral ions from the water.
After dryingMineral-rich water may leave spots or deposits.Reduces mineral residue introduced by the cleaning water.
Stuck-on buildupA hose rinse may leave droppings or existing film behind.Still needs suitable equipment and a method matched to the deposit.
At PJ SolarWe do not use ordinary tap water as our panel-glass cleaning method.DI water only on panel glass; unusual deposits are assessed separately.

Our DI-water solar panel cleaning starts at $150 for 1–15 panels. Read the cleaning price examples and separately quoted extras before requesting an estimate.

Light-colored residue on a hand beside hazy solar panels
PJ Solar job photo: Light-colored residue on a hand beside hazy solar panels.

Can clear tap water still leave spots on solar panels?

I’m PJ. Clear water isn’t automatically mineral-free water. Whether your tap water is suitable depends on its quality and the instructions for your exact panel model. My team uses purified deionized water on the glass to reduce the mineral residue introduced by the cleaning water. I don’t judge the water just by how clear it looks.

Canadian Solar’s module-cleaning guidance recommends water with low mineral content. That is a useful reason to check water quality, but the manual for your own panel model remains the reference for its care.

Clear water can leave a mark

I care about how the glass looks after it dries, not just while it’s wet. Water evaporates, but dissolved or suspended material can remain on the surface. A panel can look cleaner during a rinse and still show deposits afterward. That’s why a wet-looking finish by itself doesn’t tell me the job is done.

If you’re comparing solar panel cleaners near me, ask what “filtered water” actually means. An ordinary particle filter is not automatically a deionization system. Ask how the water is treated and what tools and cleaning process are used on the glass. I want homeowners to understand the method, not just hear a phrase that sounds good.

A rinse and a cleaning are different jobs

Rinsing is not scrubbing. Stuck-on bird droppings and film can still be there when the water dries. My standard cleaning uses DI water with an appropriate soft-bristle brush and a method matched to the panels. The deposit, equipment and safe access all matter; repeatedly wetting the roof doesn’t replace that work.

Does rain properly wash your car or windshield? It doesn’t scrub your panels either. In my article about rain and solar panel cleaning, I explain why rain is not a maintenance plan. I want to know what remains after drying and when the problem started, rather than assume the next storm will fix it.

Freshly cleaned solar panels reflecting clouds on a tile roof
PJ Solar job photo: Freshly cleaned solar panels reflecting clouds on a tile roof.

What should I tell you about persistent panel spots?

If spots return after drying or a pale haze stays on the glass, tell me what you’ve noticed. Photos and timing help me assess the work, but a picture alone cannot identify a deposit’s exact chemical makeup. Don’t guess at a stronger cleaning product just because a mark is stubborn.

Keep both feet on the ground when taking photos. Send me your panel count, the date of the last cleaning and any details about sprinklers, nearby painting or other work. Don’t climb onto the roof to inspect the marks. That history gives me a better starting point for your estimate.

Book DI-water panel cleaning

My team provides solar panel cleaning across Southern California, using DI water only on panel glass. Call me at 760-590-8516 or request an estimate. We’ll discuss the work and separately quoted conditions before booking. Ask about regular maintenance so cleaning becomes part of caring for your system, not something you only think about when the bill goes up.

By PJ Solar Cleaning & Bird Proofing.

Leave a Reply

Your email address will not be published. Required fields are marked *

Request a Bird-Proofing Assessment

Every roof and solar array is different. I base your bird-proofing estimate on the measured perimeter, roof access, cleanup needs, and materials after inspection.

Send your name, property address, email, and a description of the pigeon problem to get started. We will confirm the scope and your total investment before work begins.

Already bird-proofed? Ask about solar panel cleaning and your annual mesh inspection.

Request My Assessment